5
PRELIMINARY EXAMINATION
1. PRELIMINARY EXAMINATION
Remove the instrument and accessories from the packaging and examine it carefully. For further assistance, please contact
your local Hanna Instruments Office or email us at tech@hannainst.com.
Two installation kit versions are available:
• in-line – BL120-10, BL121-10, BL122-10, BL123-10
• flow cell – BL120-20, BL121-20, BL122-20, BL123-20
Each instrument is delivered in a cardboard box and is supplied with:
In-line mounting kit Flow cell mounting kit
• HI1036-1802 Combined electrode (pH / ORP / Temperature)
• Saddle for electrode, Ø 50 mm pipe (1 pc.)
• Fittings for electrode
• Injector (2 pcs.)
• Saddle for injectors, Ø 50 mm pipe (2 pcs.)
• Peristaltic pump tubing (2 pcs.)
• Aspiration and injection tubing (5+5 m)
• Aspiration filter (2 pcs.)
• 7.01 pH Buffer solution (3 sachets)
• 4.01 pH Buffer solution (3 sachets)
• 470 mV ORP test solution (3 sachets)
• Power cable
• Instrument quality certificate
• Instruction manual
• HI1036-1802 Combined electrode (pH / ORP / Temperature)
• Panel mounted flow cell
• Valve for flow cell connections with fittings and tubing (10 m)
• Injector (2 pcs.)
• Saddle for valves, Ø 50 mm pipe (2 pcs.)
• Saddle for injectors, Ø 50 mm pipe (2 pcs.)
• Peristaltic pump tubing (2 pcs.)
• Aspiration and injection tubing (5+5 m)
• Aspiration filter (2 pcs.)
• 7.01 pH Buffer solution (3 sachets)
• 4.01 pH Buffer solution (3 sachets)
• 470 mV ORP test solution (3 sachets)
• Power cable
• Instrument quality certificate
• Instruction manual
Note: Save all packing material until you are sure that the instrument works correctly. Any damaged or defective item
must be returned in its original packing material with the supplied accessories.
To Next Page
Loading...
