30
EVENTS MANAGEMENT
9.2. WARNINGS
Two types of warnings can be independently enabled or disabled in SETUP. If any of the warnings is
active, the LCD backlight turns yellow.
Warnings Description
Screenshot for
warning solution
Terminate condition
Startup delay Start up delay is active
Press the up / down
arrows at same time to
restart pump. Access
pH, reagent levels to
determine why pH level
is off.
Control Off Control is switched Off Set Control setting to Auto
9.3. SUMMARY OF GENERAL BEHAVIOR
Behavior Control Backlight Alarm Output Relay
Control - auto auto
green
off
Warning active off
yellow
off
Error active off
red
on
Alarm active off
red (blinking)
on
To Next Page
Loading...
