30
For TDS Range
The temperature reading as described in pH range (page 27).
The conductivity value on the primary LCD and the record number on the
secondary LCD.
The time and the date as described in pH Range.
The TDS factor on the primary LCD and cF message on the secondary LCD.
The reference temperature, the temperature coefficient, the temperature
compensation mode and the cell constant as described in EC Range.
The dEL message as described in pH Range.
For NaCl Range
The temperature reading as described in pH Range (page 27).
The conductivity value as described in TDS Range.
The time and date as described in pH Range.
The salinity factor on the primary LCD and cF message on the secondary
LCD, with LOG and NaCl tags displayed.
The reference temperature, the temperature compensation mode, the cell
constant and dEL message as described above.
Note: After LOG is pressed or dEL is confirmed, the instrument will
display the amount of free log space for about one second (example
25 records free).
Press the ALT&RCL keys to leave RECALL mode at any time.
When the information that does not display the record number is
selected, pressing and keeping hold down the ALT&SET keys will
display the record number on the secondary LCD line.
The dEL message as described in pH Range.
To Next Page
Loading...
