32
SET COMMON PARAMETERS
Instrument ID parameter
Press CAL when the instrument ID is displayed. The instrument ID (0000 to
9999) will start blinking.
Press the ARROW keys to change the instrument ID value.
Press CFM to save the modified instrument ID value.
Press CAL to escape without saving.
Note: The instrument ID is downloaded to a PC as part of a logged data, set
to identify its origin.
Current Time Set
Press CAL when the current time is displayed. The hour will start blinking.
Press the ARROW keys to change the hour.
Press RANGE. The minutes will start blinking.
Press the ARROW keys to change the minutes.
Press CFM to save the modified value.
Press CAL to escape without saving.
Current Date Set
Press CAL when the current date is displayed. The year will start blinking.
Press the ARROW keys to change the year.
To Next Page
Loading...
Need help?
General
