Hanna Instruments HI 904 - SETUP; Unpacking

2-3
SETUP
2 SETUP
2.1 Unpacking
The titrator and the accessories are shipped in a single box containing:
ITEM QUANTITY
1 Titrator ................................................................... 1 pc.
2 Air Pump Assembly ................................................. 1 pc.
3 Titration Vessel Assembly ......................................... 1 pc.
• Glass Vessel
• Accessory Port Stopper
• Sample Port Cap and Septum
• Stir Bar
• Desiccant
• Desiccant Cartridge
• Fittings, O-rings
4 Vessel Support with Adapter ..................................... 1 pc.
5 Pump Locking Screw with Plastic Head ...................... 2 pcs.
6 Reagent Bottle Assembly .......................................... 1 pc.
• Bottle Cap
• Desiccant
• Desiccant Cartridge
• Fittings, O-rings
• Tubes (Silicone and PTFE Tubing)
7 Waste Bottle Assembly ............................................. 1 pc.
• Waste Bottle
• Bottle Cap
• Desiccant
• Desiccant Cartridge
• Fittings, O-rings
• Tubes (Silicone and PTFE Tubing)
8 Calibration Key ........................................................ 1 pc.
9 Karl Fischer Dual Platinum Pin Detector Electrode ....... 1 pc.
10 Reagent Exchange Adapter ....................................... 1 pc.
11 Accessory Holder Assembly ...................................... 1 pc.
12 Joint grease............................................................. 1 pc.
13 Karl Fischer Generator Electrode................................ 1 pc.
• Removeable Generator Electrode Cable