23
HI 93703 is guaranteed for two years against defects in workmanship
and materials when used for their intended purpose and maintained
according to instructions. This warranty is limited to repair or replace-
ment free of charge. Damage due to accidents, misuse, tampering or
lack of prescribed maintenance is not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the problem. If the repair is
not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization number from the Technical
Service department and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packed for
complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
HI 731318 Tissue for wiping cuvettes (4 pcs.)
HI 731321 Spare glass cuvette (4 pcs.)
HI 731313 Maintenance kit: rugged carrying case including
HI 93703-0, HI 93703-10
and HI 93703-05
calibration standards, 1 tissue for wiping cuvettes
and 2 cuvettes
HI 93703-0 AMCO-AEPA-1 @0 FTU* calibration solution,
30 mL
HI 93703-05 AMCO-AEPA-1 @500 FTU* calibration
solution, 30 mL
HI 93703-10 AMCO-AEPA-1 @10 FTU* calibration solution,
30 mL
HI 93703-50 Cuvette cleaning solution, 230 mL
* 1 FTU = 1 NTU
WARRANTY
ACCESSORIES
To Next Page
Loading...
Need help?
General
