To Next Page

To Previous Page

7.4 CONDUCTIVITY

• From “GLP data” menu select the “Conductiv-

ity” option and press <OK>. This menu allows

to view data for conductivity, actual conductiv-

ity and salinity calibrations.

• All information regarding last conductivity calibration appears: calibrated point,

cell constant value, calibration type (conductivity, actual conductivity or salin-

ity), time and date.

• Use the arrow keys to scroll the last 5 memorized calibrations.

• For conductivity calibration the following screens are available: conductivity,

actual conductivity, salinity.

NotesNotes

Notes The “C” letter near the conductivity calibration indicates a custom point,

while the “H” means HANNA standard value.

If no conductivity calibration has been performed, a warning message

advises the user. Press <OK> to return to the previous screen.

If the selected calibration is a factory calibration, the meter shows the

message “Factory calibration”.

7.5 ATMOSPHERIC PRESSURE

• From “GLP data” menu select “Atmospheric pressure” option and press <OK>.

• All information about last atmospheric pressure calibration appears: custom

calibration point, time and date.

• If factory calibration was restored, the display

shows the message “Factory calibr. restored”.

• Use the arrow keys to scroll the last 5 memo-

rized calibrations.

NotesNotes

Notes If no atmospheric pressure calibration has been performed, a warning

message advises the user. Press <OK> to return to the previous screen.

If the selected calibration is a factory calibration, the meter shows the

message “Factory calibration”.

Hanna Instruments HI 9828 User Manual

Questions and Answers: