17
LOGGING DATA & DATA MANAGEMENT
7. LOGGING DATA & DATA MANAGEMENT
The instrument features a data log function to help you keep track of all your analysis. The data log
can hold 1000 individual measurements. Storing, viewing and deleting the data is possible using the
LOG and RECALL keys.
7.1. LOGGING DATA
Press the LOG key and the last valid measurement will be stored with a date and time stamp. Only
valid measurements can be stored.
7.2. ADDING SAMPLE & USER NAMES TO LOG DATA
A sample ID and user ID can be added to the saved log. Use the keys to highlight the Sample
ID or User ID then press Modify. Sample ID and user ID are entered using the alphanumeric multi-
tapping keypad.
Enter one character at a time by pressing the key with the assigned character repeatedly until the
desired character is highlighted. For reference, a list of the characters available for the current key will
be shown under the text box.
The character will be entered after a two-second delay or after another key is pressed.
Press Accept to update the sample or user ID.
Press functional key to delete the last character.
Press Clear to delete all of the characters.
Press the ESC key to discard all changes and return to the previous screen.
To Next Page
Loading...
