64
METHOD PROCEDURES
64
64
POTASSIUM
• Press Zero. The display will show “-0.0-” when the meter is zeroed and ready for measurement.
• Add one packet of HI93750B-0 Potassium
Reagent B. Replace the plastic stopper and the cap.
Shake gently for 1 minute.
• Insert the cuvette into the holder and close the lid.
• Press Timer and the display will show the countdown prior to the measurement or wait 3 minutes.
• After the 3 minutes have passed, invert the cuvette 5 times to mix.
• Insert the cuvette into the holder and close the lid.
• Press Read to start reading. The instrument displays the results in mg/L of potassium (K).
• Press the or key to access the second level functions.
To Next Page
Loading...
