Hanna Instruments HI9829 - Page 54

54
Meter Password
The Meter Password protects against unauthorized configuration changes and log data erasure. When
implemented, many setting and functions cannot be modified or viewed without entering the correct
password. Once entered, the password will not be required until the meter is turned ON again.
To enable the password proceed as follows:
• Highlight “Meter Password” and press <Modify>.
• Enter the desired password in the text box and press <Accept>.
Note: While typing, the characters are masked with a “*” (star) symbol.
• The meter will require password confirmation. Retype the same password and press <Accept>
to confirm.
• The meter returns to the “Meter Setup” menu. The checkbox corresponding to the meter password
is checked.
To disable the password protection highlight “Meter Password” and press <Modify>, enter the
password and then press <Disable>. “No password” appears in the text box. Press <Accept>
to confirm.
Meter ID
The Meter ID may be used to uniquely identify a meter/
operator. Press <Modify> and a text box appears. Use
the keypad to insert the desired alphanumeric ID and press
<Accept> to store the identification. A maximum of
14 characters can be used.
Language
The language used in the meter user interface can be changed.
The default language is English. Please contact your local
Hanna Instruments Office for currently available languages.
METER SETUP