56
Chapter 9 - GPS MENU (optional)
HI9829 model featuring GPS (Global Positioning System) is provided with a built‑in 12 channel
receiver and antenna to calculate meter position and track locations along with measurement data.
The GPS has a position accuracy of 10 meters (30 ft).
The GPS coordinates can be shown on the LCD together with up to 10 measurement parameters, and
are recorded with logged data.
The GPS signal strength is always displayed through a 3 length antenna indicator on the bottom right
corner of the LCD. If the antenna symbol is blinking, the satellite acquisition is not yet completed or
the signal strength is not sufficient. Signal strength can be improved by moving outdoors and away
from buildings and trees.
The user can associate GPS coordinates with alphanumeric
locations, which will be assigned to the logged data.
• To enter the GPS menu, press <Menu> from measurement
mode and select “GPS menu”.
All locations / Nearby locations
These options display all stored locations. Selecting “Nearby
locations” will filter out locations that are further than
100 km (or 100 mi) from the current location. If a GPS signal
has been obtained, the distance from the current position to the
nearby locations is also displayed.
GPS MENU
To Next Page
Loading...
