4
PRELIMINARY EXAMINATION
Remove the instrument and accessories from the packaging
and examine it carefully to make sure that no damage
has occurred during shipping. Notify your nearest Hanna
Instruments Customer Service Center if damage is observed.
Each HI991300 is delivered in a rugged carrying case and
is supplied with:
• HI12883 pH/EC/TDS probe with built‑in temperature
sensor, DIN connector and 1m (3.3’) cable
• HI70004 pH 4.01 buffer (1 sachet)
• HI70007 pH 7.01 buffer (1 sachet)
• HI70031 1413 μS/cm conductivity standard (1 sachet)
• HI70032 1382 mg/L (ppm) TDS calibration solution
(1 sachet)
• HI700601 pH and ORP electrode cleaning solution
(2 sachets)
• 100 mL beaker (1 pc.)
• 1.5V AAA alkaline batteries
• Instrument quality certificate
• Electrode quality certificate
• Instruction manual
Each HI991301 is delivered in a rugged carrying case and
is supplied with:
• HI12883 pH/EC/TDS probe with built‑in temperature
sensor, DIN connector and 1m (3.3’) cable
• HI70004 pH 4.01 buffer (1 sachet)
• HI70007 pH 7.01 buffer (1 sachet)
• HI70030 12880 μS/cm conductivity standard (1 sachet)
• HI70038 6.44 g/L (ppt) TDS calibration solution (1 sachet)
• HI700601 pH and ORP electrode cleaning solution
(2 sachets)
• 100 mL beaker (1 pc.)
• 1.5V AAA alkaline batteries
• Instrument quality certificate
• Electrode quality certificate
• Instruction manual
Note: Save all packing material until you are sure
that the instrument works correctly. Any damaged or
defective item must be returned in its original packing
material with the supplied accessories.
PRELIMINARY EXAMINATION
To Next Page
Loading...
Need help?
General
