Page EN-13
Cycle tables/Detergent recommendation
1)
Maximum amount of dry textiles that can be treated in the respective wash cycle.
2)
The highest temperature reached by the laundry in the wash cycle for at least five minutes.
“--” stands for “Washing water not heating up”
3)
Residual moisture after the wash cycle in water content percent and the spin speed at
which this was achieved.
4)
The appliance keeps the washing temperature above 60 °C for longer than 30 minutes in
order to eliminate harmful bacteria.
5)
ECO 40–60 is used to check compliance with EU ecodesign regulations.
6)
For information on “Custom” cycle, see page EN-21.
7)
The washing water temperature is not displayed
“Standard cycles” table
Cycle
6)
Type of laundry
Load capacity,
maximum [kg]
1)
Cycle time [hr/min]
Standard temperature
[°C]
2)
Energy consumption
[kWh/operating cycle]
Water consumption
[litres/operating cycle]
Residual moisture [%/
spin speed in rpm]
3)
Wool
Machine-washable wool and
delicates as well as hand wash
2 1:07 40 0.410 60 80/600
Rinse All clothing 8 0:20 / 0.045 23 65/1000
Spin
Spin-dry garments – spin cycle
with freely selectable spin speed
incl. draining
8 0:12 / 0.038 / 65/800
Cleaning the drum 0 1:18 90 0.839 20 /
Other than “ECO 40–60”, the values specified for the cycles are only guidelines. The length
of the cycle may differ from the information provided in this table, depending on the laundry
load, the water temperature and ambient temperature, as well as any changed settings.
To Next Page
Loading...
Need help?
General