Hansen QVRB2 User Manual

HANSEN P4
Standardized gear units
Service manual
405 EFDN f
Standardized Réducteurs de Normzahnrad- Standaard
gear units vitesse standard getriebe tandwielkasten
Service Manuel Betriebs- Bedrijfs-
manual d'entretien anleitung handboek
SHIPPED
WITHOUT
OIL
LIVRE
SANS
HUILE
GELIEFERT
OHNE
ÖL
GELEVERD
ZONDER
OLIE
ISO 9001
Carefully
read this
manual
before
installing the
gear unit.
Lisez
attentivement
ce manuel
avant
d'installer le
réducteur.
Lesen Sie
diese
Betriebs-
anleitung vor
dem Einbau
des Getriebes
bitte sorg-
fältig durch.
Lees
zorgvuldig dit
bedrijfshand-
boek
vooraleer de
tandwielkast
te installeren.
Carefully read this manual
before installing the gear unit.
405 EFDN f
Standardized Réducteurs de Normzahnrad- Standaard
gear units vitesse standard getriebe tandwielkasten
Service Manuel Betriebs- Bedrijfs-
manual d'entretien anleitung handboek
SHIPPED
WITHOUT
OIL
LIVRE
SANS
HUILE
GELIEFERT
OHNE
ÖL
GELEVERD
ZONDER
OLIE
ISO 9001
Carefully
read this
manual
before
installing the
gear unit.
Lisez
attentivement
ce manuel
avant
d'installer le
réducteur.
Lesen Sie
diese
Betriebs-
anleitung vor
dem Einbau
des Getriebes
bitte sorg-
fältig durch.
Lees
zorgvuldig dit
bedrijfshand-
boek
vooraleer de
tandwielkast
te installeren.
405 EFDN f
Standardized Réducteurs de Normzahnrad- Standaard
gear units vitesse standard getriebe tandwielkasten
Service Manuel Betriebs- Bedrijfs-
manual d'entretien anleitung handboek
SHIPPED
WITHOUT
OIL
LIVRE
SANS
HUILE
GELIEFERT
OHNE
ÖL
GELEVERD
ZONDER
OLIE
ISO 9001
Carefully
read this
manual
before
installing the
gear unit.
Lisez
attentivement
ce manuel
avant
d'installer le
réducteur.
Lesen Sie
diese
Betriebs-
anleitung vor
dem Einbau
des Getriebes
bitte sorg-
fältig durch.
Lees
zorgvuldig dit
bedrijfshand-
boek
vooraleer de
tandwielkast
te installeren.
405 Ef

Hansen QVRB2 Specifications

General

Brand	Hansen
Model	QVRB2
Category	DC Drives
Language	English

Summary

Introduction, General Information, and Safety

Scope of the Service Manual

Manual provides instructions for Hansen P4 gear units regarding operation, maintenance, and safety.

General Instructions and Safety Precautions

Covers general instructions, security, handling, installation, temperature, fire, electrical safety, and noise.

Shipping, Storage, Handling, and Installation

Shipping and Storage Guidelines

Details shipping conditions, packing, and storage requirements to prevent damage and corrosion.

Gear Unit Handling and Lifting

Provides instructions for safe handling, lifting, and use of lifting points for Hansen P4 gear units.

Installation Procedures and Alignment

Covers fitting accessories, coupling installation, securing units, torque specifications, and precise alignment.

Lubrication, Cooling, Ventilation, and Backstops

Lubrication Systems and Oil Selection

Explains lubrication functions, systems (splash, forced feed), oil selection, and quantity.

Cooling, Ventilation, and Backstop Checks

Addresses heat dissipation, ventilation breathers, and inspection/maintenance of backstops for reliability.

Startup, Maintenance, and Lubricant Details

Gear Unit Startup Procedures

Covers pre-startup checks for all units, units with heaters, two-speed motors, and forced feed lubrication.

Maintenance Procedures and Schedules

Details inspection, oil changes, regreasing, oil sampling, and protection during extended standstill.

Grease Quantities and Lubricant Recommendations

Provides grease quantities for bearings/seals and lists recommended mineral/synthetic oils and greases.