Hansen QVRB2 User Manual

MAINTENANCE ISSUES
Refer to chapter 12: Maintenance
Maintenance table
Periodical inspections as stated below will increase the reliability and lifetime.
(1) Check the internal components of the gear unit for corrosion before start up.
Repeat this check after each extended period of standstill (refer to section 12.6).
The result of this inspection must be documented and made available on request.
Any evidence of corrosion on internal components of the gear unit must be reported to
Hansen Industrial Transmissions nv.
7
ENGLISH
Fixation of the gear
unit
After first
run
*
Corrosion
(1)
Alignment *
Oil leaks
Lubrication
*
*
Cleanliness
Abnormal noise and
vibrations
*
Oil level
Oil sample analysis
*
Greasing
Check the proper
functioning of the
backsto
p
Couplings - elastic
elements
Refer to the
appropriate service
manual
Minimum
Monthly 6-Monthly Yearly
*
*
*
*
*
*
*
*
*
*
*
* (Or biennial)
Note: This quick reference for handling the gear unit is not exhaustive.
The obligation to read the complete service manual remains.
6

Hansen QVRB2 Specifications

General

Brand	Hansen
Model	QVRB2
Category	DC Drives
Language	English