hanshow HS C09978 - Network and ESL-Working Configuration

Hanshow ESL Controller HS_C09978 Product Manual
13 Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.
4.2.3 Network setting
Network setting is used for setting network parameters of HS_C09978. It supports two
IP types: IPv4 and IPv6; two IP address acquisition modes: DHCP or static IP.
⚫ If IP type is IPv4, the configuration page is shown in Figure 4-4.
Figure 4-4 Network configuration page 1
The configuration items are illustrated as shown in Table 4-2.
Table 4-2 Configuration item description
No.
Configuration item
Description
1
IP type
Support IPv6/IPv4 dual protocol stacks. To configure the
parameters when selecting IPv4.
2
DHCP
⚫ When set to OFF, IP address should be configured
manually.
⚫ When set to ON, the device is DHCP client, and IP
address should be get from DHCP server.
3
IPv4 address
Configurable when DHCP is OFF.
4
Subnet mask
Configurable when DHCP is OFF.