hanshow HS C09978 - Navigating Configuration Settings

Hanshow ESL Controller HS_C09978 Product Manual
12 Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.
4.2.2 Homepage
HS_C09978’s configuration homepage is as shown in Figure 4-3.
Figure 4-3 Configuration homepage
The configuration item description is shown in Table 4-1.
Table 4-1 Configuration item description
No.
Configuration item
Description
1
Network
Used to set network parameters such as DHCP, IP
address, subnet mask, etc.
2
ESL-Working
Used to configure ESL-Working parameter.
3
Reboot AP
Reboot AP device.
4
AP Description
To add description information.
5
NTP Setting
Used to configure NTP service.
6
Change admin password
Used to change the password.
7
Restore factory settings
Used to restore default settings.
8
Update firmware
Used to upgrade for main system and RF subsystem.