Specifications
DSO4000 Series Digital Storage Oscilloscope 75
5.2 Accessories
All the following accessories are available.
Standard Accessories
X1, X10 two passive probes. The passive probes have a 6MHz bandwidth
(rated 100Vrms CAT III) when the switch is in the X1 position, and a
maximum bandwidth (rated 300Vrms CAT II) when the switch is in the X10
position. Each probe consists of all necessary fittings.
A USB A-B line, used to connect external devices with USB-B interface
like a printer or to establish communications between PC and the
oscilloscope.
A power cord special for this product. In addition to the power cord shipped
with your instrument, you may purchase another one certified for the
country of use.
A software installation CD. It contains the user manual of DSO4000, giving
particular descriptions on the DSO4000 series oscilloscopes.
To Next Page
Loading...
