Need help?Do you have a question about the Hantek DSO 1202B and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Sample Rate | 1 GSa/s |
| Channels | 2 |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Power Supply | 100-240VAC, 50/60Hz |
| Input Coupling | AC, DC, GND |
| Probe Attenuation | 1X, 10X |
| Time Base Range | 5 ns/div - 50 s/div |
| Vertical Resolution | 8 bits |
| Display Resolution | 800 x 480 pixels |
| Interface | USB |
| USB Interface | USB host, USB device |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C - 60°C |
| Input Impedance | 1 MΩ ±2% // 15 pF |
Overview of essential safety precautions to prevent injury and product damage.
Brief overview of the DSO1000B series models, bandwidths, and features.
Instructions for initial setup, powering on, and basic functional checks.
Guidance on examining, compensating, and setting up oscilloscope probes.
Explanation of trigger sources, types (Edge, Video, etc.), and modes.
Understanding Real-time vs. Equivalent acquisition and their modes (Normal, Peak Detect, Average).
Methods for measuring waveforms using graticules, cursors, and automatic measurements.
Adjusting horizontal scale, position, and using single/dual-window modes.
Step-by-step solutions for common problems like startup failure or no display.
Detailed specs for horizontal/vertical axes, sample rate, bandwidth, and accuracy.
To Next Page
