Hantek DSO 1202B User Manual

Specifications
DSO1000B Series HandHeld Oscilloscope User Manual 72
60.00K 10Ω
600.0K 100Ω
6.000M 1KΩ
60.00M ±1.5%±3digit 10KΩ
Capacitance
40.00nF
±1%±1digit
10pF
400.0nF 100pF
4.000uF 1nF
40.00uF 10nF
400.0uF 100nF
Attention:The smallest capacitance value that can be measured is 5nF.
Diode
0V~2.0V
On-off Test
<
1
0Ω
Linux Feature
Kernel Version
Linux2.6.30.4
Supported File system
Yaffs, Fat32
Drivers
Sound Driver, Buzzer Driver, FPGA Driver, SPI Driver, USB
Host Driver, LCD Driver, USB massstorage、gadget Driver
Linux Applications busybox1.18.4, mplayer, watchdog, gnupg1.4.11
U_boot Version u-boot-1.1.6
Sourcecode download website
www.hantek.com./download/handscope.zip
9.2 Accessories
All the following accessories are available by contacting your local HANTEK distributor.
Standard Accessories
Sketch
Description
X1, X10 two passive probes. The passive probes have a 6MHz
bandwidth (rated 100Vrms CAT III) when the switch is in the X1
position, and a maximum bandwidth (rated 300Vrms CAT II) when
the switch is in the X10 position. Each probe consists of all
necessary fittings.
A quick guide of the DSO1000B
series oscilloscopes. It gives a
description mainly on functions and operating basis of these
oscilloscopes.
A Power Adapter that fits the standard of destination country.
ptional Accessories
Sketch
Description

Hantek DSO 1202B Specifications

General

Brand	Hantek
Model	DSO 1202B
Category	Test Equipment
Language	English