Hantek DSO4102 User Manual

DSO4000 Series Digital Storage Oscilloscope 77
Appendix A Harmful and Poisonous
Substances or Elements
Harmful and poisonous substances or elements
1
Component
2
Pb
Hg
Cd
Cr(Vi)
PBB
PBDE
Shell and Chassis
X
0
0
X
0
0
Display Module
X
X
0
0
0
0
Circuit Board
X
0
0
X
0
0
Power Supply
X
0
0
X
0
0
Electric Wire and Cable Assembly
X
0
0
0
0
0
Connector
X
0
0
X
0
0
Fastener and Installed Hardware
X
0
X
X
0
0
Other Accessories (including
probes)
X
0
0
X
0
0
Others
0
0
0
0
0
0
‘X’ means that at least the content of this poisonous and harmful substance in a homogeneous
material of this component exceeds the limit specified in the SJ/T 11363-2006 standard.
‘0’ indicates that the content of this poisonous and harmful substance in all homogeneous
materials of this component is refrained under the limit stated in the SJ/T 11363-2006 standard.
This component list contains components approved in the file ‘Management Measures’.

Hantek DSO4102 Specifications

General

Bandwidth	100 MHz
Sample Rate	1 GSa/s
Channels	2
Display Resolution	800 x 480 pixels
Interface	USB host, USB device
FFT	Yes
Math Functions	+, -, *, /, FFT
Display	7 inch TFT LCD
Input Voltage Range	400 V (DC + AC peak)
Record Length	40K
Vertical Resolution	8 bit
Vertical Sensitivity	2 mV/div to 10 V/div
Timebase Range	5 ns/div - 50 s/div
Trigger Modes	Edge, Pulse, Video, Alternate
Power Supply	100-240 VAC, 50/60 Hz
Time Base	5 ns/div - 50 s/div
Input Impedance	1MΩ ± 2%