Need help?Do you have a question about the Hantek DSO5202P and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Sample Rate | 1 GSa/s |
| Channels | 2 |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Time Base | 5 ns/div to 50 s/div |
| Display | 7 inch TFT LCD |
| Record Length | 40 Kpts |
| Interface | USB, LAN |
| Input Impedance | 1 MΩ ± 2% |
Key precautions to avoid injury and product damage.
Details physical installation requirements, including ventilation and power.
Guides users through a quick functional check of the oscilloscope.
Explains how to manually compensate probes for accurate measurements.
Details the self-calibration routine for optimizing measurement accuracy.
Introduces trigger concepts, types, modes, and controls for stable displays.
Describes different data acquisition modes (Normal, Peak Detect, Average).
Details various trigger types and their associated controls.
Explains the function of quick-access buttons like Autoset and Default Setup.
Demonstrates basic measurements like frequency and amplitude using Autoset.
Provides solutions for common oscilloscope operational issues.
Lists detailed technical specifications for the oscilloscope.
To Next Page
