Specifications
DSO5000P Series Digital Storage Oscilloscope User Manual 66
8.2 Accessories
All the following accessories are available.
Standard Accessories
X1, X10 two passive probes. The passive probes have a 6MHz
bandwidth (rated 100Vrms CAT III) when the switch is in the X1
position, and a maximum bandwidth (rated 300Vrms CAT II) when
the switch is in the X10 position. Each probe consists of all
necessary fittings.
A USB A-B line, used to connect external devices with USB-B
interface like a printer or to establish communications between PC
and the oscilloscope.
A power cord special for this product. In addition to the power cord
shipped with your instrument, you may purchase another one
certified for the country of use.
A software installation CD. It contains the user manual of
DSO5000P, giving particular descriptions on the DSO5000P series
oscilloscopes.
To Next Page
Loading...
