Hantek DSO5000 Series User Manual

Basic Operation
UTIILITY: Displays the Utility menu.
CURSOR: Displays the Cursor menu.
DISPLAY: Displays the Display menu.
5.5.1SAVE/RECALL
Press the SAVE/RECALL button to save or recall oscilloscope setups or waveforms.
The first page shows the following menu.
Options Settings Comments
Waveforms
Source CH1
CH2 off
MATH off
Select a waveform display to store.
REF RefA
RefB
Select the reference location to store or recall a waveform.
Operation Save Save the source waveform to the selected reference location.
Ref on
Ref off
Display or remove the reference waveform on the screen.
Press ‘Next Page’ to recall the following menu.
Options Settings Comments
Setups
Operation
Source
Flash memory
USB disk
Store the current setups to the USB disk or the memory of the
oscilloscope.
Memory 0 to 9 Specify the memory location in which to store the current waveform
settings or from which to recall the waveform settings. Use the V0
knob to select.
Operation Save Complete the saving operation.
Recall Recall the oscilloscope settings stored in the location selected in the
Setup field. Push the Default Setup button to initialize the oscilloscope
to a known setup.
See below for waveform menus.
DSO5000 Series Digital Storage Oscilloscope User Manual 37

Hantek DSO5000 Series Specifications

General

Brand	Hantek
Model	DSO5000 Series
Category	Oscilloscope
Language	English