Specifications
Standard Accessories
Sketch Description
X1, X10 two passive probes. The passive probes have a 6MHz
bandwidth (rated 100Vrms CAT III) when the switch is in the X1
position, and a maximum bandwidth (rated 300Vrms CAT II) when
the switch is in the X10 position. Each probe consists of all
necessary fittings.
A quick guide of the DSO5000 series oscilloscopes. It gives a
description mainly on functions and operating basis of these
oscilloscopes.
A power cord special for this product. In addition to the power cord
shipped with your instrument, you may purchase another one
certified for the country of use.
A warranty card. When there appears something wrong with the
product, it can be returned for repair under warranty.
Optional Accessories
Sketch Description
A USB A-B line, used to connect external devices with USB-B
interface like a printer or to establish communications between PC
and the oscilloscope.
A software installation CD. It contains the user manual of DSO5000,
giving particular descriptions on the DSO5000 series oscilloscopes.
DSO5000 Series Digital Storage Oscilloscope User Manual 74
To Next Page
Loading...
Need help?
General
