Specifications
X1, X10 two passive probes. The passive probes have a 6MHz
bandwidth (rated 100Vrms CAT III) when the switch is in the X1
position, and a maximum bandwidth (rated 300Vrms CAT II) when
the switch is in the X10 position. Each probe consists of all
necessary fittings.
A quick guide of the DSO5000BM series oscilloscopes. It gives a
description mainly on functions and operating basis of these
oscilloscopes.
A power cord special for this product. In addition to the power cord
shipped with your instrument, you may purchase another one
certified for the country of use.
A warranty card. When there appears something wrong with the
product, it can be returned for repair under warranty.
Optional Accessories
Sketch Description
A USB A-B line, used to connect external devices with USB-B
interface like a printer or to establish communications between PC
and the oscilloscope.
A software installation CD. It contains the user manual of
DSO5000BM, giving particular descriptions on the DSO5000BM
series oscilloscopes.
DSO5000 Series Digital Storage Oscilloscope User Manual 74
To Next Page
Loading...