HANYOUNG NUX ML-D Series - ML-D4의 Register Composition

25
Before staring Installation Operation Specifications
3.2.3 ML-D4 Register composition
No. 0 Description +100 +200 +300 +400 Description by channel
0 - - - - - - -
1 PV.1
Process value
PV.1 PV.2 PV.3 PV.4 Process value
2 PV.2 SV.1 SV.2 SV.3 SV.4 Set value
3 PV.3 MV.1 MV.2 MV.3 MV.4 Manipulated Value
4 PV.4
CHSTS.1
CHSTS.2 CHSTS.3
CHSTS.4
Channel status
5 - - EVSTS.1 EVSTS.2 EVSTS.3 EVSTS.4 Event status
6 SV.1
Set value
OUTSTS.1 OUTSTS.2 OUTSTS.3 OUTSTS.4 control output status
7 SV.2 RJC.1 RJC.2 RJC.3 RJC.4 Temperature
8 SV.3 TC.1 TC.2 TC.3 TC.4 Sensor value
9 SV.4 INP.1 INP.2 INP.3 INP.4 Input type
10 - - CHMD.1 CHMD.2 CHMD.3 CHMD.4 Channel mode
11
MV.1
Manipulated Value
AT.1 AT.2 AT.3 AT.4 Auto tuning
12 MV.2 OUT.1 OUT.2 OUT.3 OUT.4 Output type
13 MV.3 EV.1DLY.1 EV.1DLY.2 EV.1DLY.3 EV.1DLY.4 Event 1 delay setting
14 MV.4 EV.2DLY.1 EV.2DLY.2 EV.2DLY.3 EV.2DLY.4 Event 2 delay setting
15 - - EV.3DLY.1 EV.3DLY.2 EV.3DLY.3 EV.3DLY.4 Event 3 delay setting
16 CHSTS.1
Channel status
EV.4DLY.1 EV.4DLY.2 EV.4DLY.3 EV.4DLY.4 Event 4 delay setting
17 CHSTS.2 EV.5DLY.1 EV.5DLY.2 EV.5DLY.3 EV.5DLY.4 Event 5 delay setting
18 CHSTS.3 EV.6DLY.1 EV.6DLY.2 EV.6DLY.3 EV.6DLY.4 Event 6 delay setting
19 CHSTS.4 EV.7DLY.1 EV.7DLY.2 EV.7DLY.3 EV.7DLY.4 Event 7 delay setting
20 - - EV.8DLY.1 EV.8DLY.2 EV.8DLY.3 EV.8DLY.4 Event 8 delay setting
21 TSV.1
Current target
set value
EV.1TY.1 EV.1TY.2 EV.1TY.3 EV.1TY.4
Event 1 setting22 TSV.2 EV.1VL.1 EV.1VL.2 EV.1VL.3 EV.1VL.4
23 TSV.3 EV.1HY.1 EV.1HY.2 EV.1HY.3 EV.1HY.4
24 TSV.4 EV.2TY.1 EV.2TY.2 EV.2TY.3 EV.2TY.4
Event 2 setting25 - - EV.2VL.1 EV.2VL.2 EV.2VL.3 EV.2VL.4
26 EVT_STS Event status EV.2HY.1 EV.2HY.2 EV.2HY.3 EV.2HY.4
27 EVBUS_STS Event output status EV.3TY1 EV.3TY2 EV.3TY3 EV.3TY4
Event 3 setting28 - - EV.3VL.1 EV.3VL.2 EV.3VL.3 EV.3VL.4
29 - - EV.3HY.1 EV.3HY.2 EV.3HY.3 EV.3HY.4
30 - - EV.4TY.1 EV.4TY.2 EV.4TY.3 EV.4TY.4
Event 4 setting
31 LOCK Parameter setting lock EV.4VL.1 EV.4VL.2 EV.4VL.3 EV.4VL.4
32 COMCHK
Time setting for RS485
communication
disconnection detection
time
EV.4HY.1 EV.4HY.2 EV.4HY.3 EV.4HY.4
33 PARA_SAVE
Save parameter
when communicating
EV.5TY.1 EV.5TY.2 EV.5TY.3 EV.5TY.4
Event 5 setting
34
PARA_
COPY
Run parameter save EV.5VL.1 EV.5VL.2 EV.5VL.3 EV.5VL.4
35 - - EV.5HY.1 EV.5HY.2 EV.5HY.3 EV.5HY.4
36 CHMD.1
Channel mode
EV.6TY.1 EV.6TY.2 EV.6TY.3 EV.6TY.4
Event 6 setting37 CHMD.2 EV.6VL.1 EV.6VL.2 EV.6VL.3 EV.6VL.4
38 CHMD.3 EV.6HY.1 EV.6HY.2 EV.6HY.3 EV.6HY.4
39 CHMD.4 EV.7TY.1 EV.7TY.2 EV.7TY.3 EV.7TY.4
Event 7 setting
40 - - EV.7VL.1 EV.7VL.2 EV.7VL.3 EV.7VL.4
41 AT.1 Auto tuning EV.7HY.1 EV.7HY.2 EV.7HY.3 EV.7HY.4
42 AT.2
Auto tuning
EV.8TY.1 EV.8TY.2 EV.8TY.3 EV.8TY.4
Event 8 setting43 AT.3 EV.8VL.1 EV.8VL.2 EV.8VL.3 EV.8VL.4
44 AT.4 EV.8HY.1 EV.8HY.2 EV.8HY.3 EV.8HY.4