11
6-3. LCD Displays
1) Program Run
2) Fixed Control (FIX)
· Operating display consists of five sub-displays.
· Press for display switching.
① SV : This display indicates the set value that currently is
being monitored and programmed.
② ℃
: This display indicates the temperature unit as below
Direct current (d.c. V) : temperature unit of U.UNIT.
Thermocouple or RTD : temperature unit of UNIT.
③ PT
: This display indicates the pattern number.
④ SEGNO
:
This display indicates the running segment (Now SEG) and total number of programmed segments (Total SEG).
⑤ TIME
:
This display indicates the remaining time of running segment (hr./Min.:**h** or Min./Sec.:**m**).
⑥ REPEAT
:
This display indicates the number(s) of repeated and total number of repeats (Now Repeat / Total Repeat).
If Total Repeat is Continue or Now Repeat exceeds 99, the display indicates [∞].
① SV: This display indicates the set value that currently is being monitored and programmed.
② ℃: This display indicates the temperature unit as below:
Direct current (d.c. V): temperature unit of U.UNIT;
Thermocouple or RTD: temperature unit of UNIT.
③ ? : This display blink "?" when SV is changed by pressing key during the FIX mode.
●
Operating Display
●
Set Value (SV) Display
[Heating model: SV Display at Fix Mode] [Heating/Cooling model, SV Display at Fix Mode]
To Next Page
Loading...
