17
16
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fan does not move. 1. Faulty wire connection.
2. Reverse switch not engaged.
1. Turn power off. Loosen canopy,
check all connections.
2. Pushswitchrmlyeitherway.
Noisy operation. 1. Blades are loose.
2. Cracked blade.
3. Unapproved speed control.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
3. Replace with an approved speed
control device.
Excessive wobbling. 1. The blades are loose.
2. Blade brackets incorrectly
attached.
3. Unbalanced blades.
4. The fan is not securely mounted.
5. Fan too close to vaulted ceiling.
1. Tighten all blade screws.
2. Reinstall blade brackets.
3. Switch with blade from the
opposite side.
4. Turn power off. Carefully loosen
the canopy and remount securely.
5. Lower fan or move it to another
location.
TROUBLESHOOTING
CARE AND MAINTENANCE
• Important: Shut off main power supply before beginning any maintenance.
• Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
• Cleanfanhousingwithonlyasoftbrushorlint-freeclothtoavoidscratchingthenish.Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades
for added protection.
• At least twice a year, tighten all screws and lower canopy to check mounting bracket screws and
downrod assembly.
• Bulb replacement: Use 60-watt max. candelabra-base E12-type incandescent bulbs.
• Battery replacement: Use an A23 12-volt alkaline battery for the remote control.
3. Reverse Switch:
When the season changes, you may want to change
the direction your fan spins. To switch between
clockwiseandcounterclockwiserotations,ipthefan
reversal switch.
WARNING: Wait for fan to stop before reversing the
switch.
A. In cooler weather, clockwise rotation creates an
upwardairow,whichmoveshotairfromthe
ceiling into the room. Push the switch RIGHT to
showthesnowakeicon.
B. In warmer weather, counterclockwise rotation
createsadownwardairow,whichcoolstheair.
Push the switch LEFT to show the sun icon.
For the DIMMER function, press and hold the light button. Light will dim. Release the button when
light is at desired level.
Note: This remote control has a memory function. The receiver stores the fan speed and light setting
when the fan is turned off. When fan is turned on again, it starts with the most recent settings.
OPERATING INSTRUCTIONS
Lowes.com/harborbreeze Lowes.com/harborbreeze