Harbor Breeze 40680 User Manual (English)

Questions and Answers:

W
William DavisAug 3, 2025
How to fix a Harbor Breeze 40680 that won't turn on?
- M
  Miss Haley Ferguson MDAug 3, 2025
  If your Harbor Breeze Fan isn't moving, here's what you can check: * The reverse switch is not engaged. Firmly push the reverse switch completely up or down. * The wall switch is turned off. Make sure the wall switch is turned on. * The power is off or the fuse (breaker) is blown. Turn the power on or check the fuse (breaker). * There is a faulty wire connection. Turn the power off and check all connections at the ceiling outlet box.
S
Sarah HarrisonAug 10, 2025
What to do if the lights on my Harbor Breeze 40680 are not working?
- E
  ehernandezAug 10, 2025
  If your Harbor Breeze Fan is working but the lights aren't, try these steps: * The bulbs are not installed correctly. Re-install the bulb(s). * The light kit wire plugs are not connected properly. Ensure the single-pin connectors in the light kit are connected properly. * There is a faulty wire connection. Turn the power off and check all connections at the ceiling outlet box.
L
Laura SaundersAug 18, 2025
Why is my Harbor Breeze Fan so noisy?
- J
  Jessica ButlerAug 18, 2025
  There are several reasons why your Harbor Breeze Fan might be noisy: * The blades are loose. Ensure all screws that hold the fan blades to the blade arms and the motor are tightened. * There is a cracked blade. Replace any cracked blades. * The wall control is not compatible with the fan. Avoid using a full range dimmer switch to control the fan speed. * The outlet box is not secure. Make sure the outlet box is securely attached to the building structure. * The mounting bracket is not secure. Ensure the mounting bracket is secured to the outlet box, and that the screws are tight.
C
Charles FergusonAug 27, 2025
What to do if my Harbor Breeze 40680 Fan is wobbling excessively?
- C
  ccunninghamAug 27, 2025
  If your Harbor Breeze Fan is wobbling excessively, it could be due to several factors: * The blades and/or blade arms are loose. Check and tighten all screws that hold the fan blades to the blade arms and the blade arms to the motor. * The blades are unbalanced. Try switching one blade with a blade from the opposite side. Alternatively, balance the fan using the blade balancing kit (O). * The fan mounting is not secure. Turn off the power, loosen the canopy, and verify that the mounting bracket is secure to the electrical outlet box. The bracket must be flush without movement against the outlet box. Also, verify the outlet box is secure.

Harbor Breeze 40680 Specifications

General

Brand	Harbor Breeze
Model	40680
Type	Ceiling Fan
Blade Span	52 inches
Number of Blades	5
Reversible Motor	Yes
Finish	Brushed Nickel
Motor Type	AC
Control Type	Pull Chain
Blade Color Family	Brown
Blade Material	Wood
Color Family	Nickel
ENERGY STAR Certified	No
Fan Blade Color	Walnut
Fixture Color Family	Nickel
Indoor/Outdoor	Indoor
Number of Speeds	3
Overall Fan Diameter (in.)	52
Style	Traditional
Motor Speed	3-speed