EasyManua.ls Logo

Harbor Breeze BELLEVUE E-BE44MWW5C - User Manual

Harbor Breeze BELLEVUE E-BE44MWW5C
42 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
E124404
1
ITEM #0096879
0096950
0096982
0205233
SOS ITEM #0018035
BELLEVUE CEILING FAN
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
Español p. 22
MODEL #E-BE44ABZ5C
E-BE44AN5C
E-BE44MWW5C
E-BE44PPW5C
E-BE44AB5CS
Federal regulations require ceiling fans with light kits manufactured or imported after
January 1, 2009, to limit total wattage consumed by the light kit to 190W. Therefore,
this fan is equipped with a wattage limiting device.
Questions, problems, missing parts? Before returning to your retailer, call or contact our
customer service department at 1-800-527-1292, 8:30 a.m. - 5:00 p.m., CST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date

Table of Contents

Questions and Answers

  • J
    Jason BaldwinAug 6, 2025
    How to fix a Harbor Breeze BELLEVUE E-BE44MWW5C that is wobbling?
    • D
      doyleharryAug 6, 2025
      If your Harbor Breeze Fan is wobbling excessively, several factors could be the cause. First, ensure all blade screws are tightened. If the issue persists, check if the blade arms are incorrectly attached and re-install them if needed. Try switching one blade with a blade from the opposite side to address unbalanced blades. Also, verify that the mounting bracket is secure by carefully loosening the canopy. Ensure the fan isn't too close to a vaulted ceiling; if it is, use a longer downrod or relocate the fan. Finally, make sure the set screws on the motor housing yoke and the hanging ball are tightened properly.
  • B
    brownrachelAug 20, 2025
    What to do if the lights on my Harbor Breeze Fan are not working?
    • S
      Sandra FigueroaAug 21, 2025
      If your Harbor Breeze Fan is operating but the lights are not working, start by re-installing the bulbs to ensure they are correctly placed. Check the wiring in the canopy and re-wire if necessary. Make sure the wall switch to the fan is turned on. Verify that the male and female plugs in the light kit fitter are properly connected. Lastly, ensure that the total wattage of the bulbs in the light kit does not exceed 190W.

Summary

Safety Information

Product Overview

Package Contents

Hardware Contents

Preparation

Initial Installation

Downrod Style Fan Mounting

Closemount Style Fan Mounting

Wiring

Final Installation

Operation Instructions

Care and Maintenance

Troubleshooting

Warranty

Replacement Parts List

Harbor Breeze BELLEVUE E-BE44MWW5C Specifications

General IconGeneral
BrandHarbor Breeze
ModelBELLEVUE E-BE44MWW5C
CategoryFan
LanguageEnglish

Related product manuals