EasyManua.ls Logo

Harbor Breeze CEDAR HILL - User Manual

Harbor Breeze CEDAR HILL
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-527-1292, 8:30 a.m.-5 p.m., CST, Monday-Friday.
ITEM #0312114
MODEL #E-PEN44BCW5MC
CEDAR HILL CEILING FAN
español p. 20
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
E206035
Federal regulations require all ceiling fans with light kits manufactured
or imported after January 1, 2009, to limit total wattage consumed by the
light kit to 190W. Therefore, this fan is equipped with a wattage limiting
device.
1

Table of Contents

Questions and Answers

  • N
    Nancy GuzmanAug 11, 2025
    Why is my Harbor Breeze CEDAR HILL wobbling excessively?
    • T
      Thomas SalazarAug 11, 2025
      Excessive wobbling can occur for several reasons. The blades might be loose, so tighten all blade screws. The blade arms could be incorrectly attached; try re-installing them. Unbalanced blades can also cause wobbling; switch one blade with a blade from the opposite side. Ensure the fan is securely mounted by verifying the mounting bracket is secure. If the fan is too close to a vaulted ceiling, use a longer downrod or move the fan. Also, make sure the set screws on the motor housing yoke and hanging ball are tightened properly.
  • S
    Stephen WallsAug 19, 2025
    How to fix a Harbor Breeze CEDAR HILL that does not move?
    • H
      Holly AdamsAug 19, 2025
      If your fan isn't moving, first check that the reverse switch is fully engaged by pushing it firmly either up. Ensure that the power is on and the fuse is not blown. If these steps don't resolve the issue, turn the power off, loosen the canopy, and check all wire connections.
  • M
    Matthew CollinsAug 27, 2025
    What to do if my Harbor Breeze Fan operates but the lights fail?
    • T
      Tina FloydAug 27, 2025
      If your fan operates but the lights don't work, first ensure the bulbs are installed correctly. Check the wires in the canopy and re-wire if necessary, according to the wiring instructions. Make sure the wall switch to the fan is on. Also, check the wires in the switch housing and re-wire if needed. Finally, ensure that the light kit is lamped with no more than 190W.
  • K
    Kenneth GonzalezSep 2, 2025
    What to do if my Harbor Breeze CEDAR HILL Fan is making noise?
    • S
      Scott MckaySep 3, 2025
      Noisy operation can be due to several factors. Check if the blades are loose and tighten all blade screws. A cracked blade can also cause noise, so replace it if necessary. If you're using a full range dimmer switch, replace it with an approved speed control device. Also, if the fan is new, allow it a "break in" period of a few days, especially when running the fan at Medium and High speeds.

Harbor Breeze CEDAR HILL Specifications

General IconGeneral
TypeCeiling Fan
Number of Blades5
Motor TypeAC
Fan Width (in.)52
Mounting OptionsDownrod
Indoor/OutdoorIndoor
ReversibleYes
Blade Span52 inches
Motor Speed3 speeds

Related product manuals