Harbor Breeze JP18EB3 - Removing Blade Assembly Nut; Attaching Blade Assembly; Securing Blade Assembly Nut

Turn blade assembly nut (F) clockwise to remove
from shaft on fan motor.
9
F
9.
Place blade assembly (D) over motor shaft and lock
pin, making sure to align gap on the blade assembly
(D) with lock pin on motor. Using the Allen wrench
(DD), turn preassembled set screw located on the
blade assembley (D) clockwise to secure blade
assembly (D) to fan motor.
10.
CC
Allen Wrench x 1
Hardware Used
Re-attach blade assembly nut (F) into center of
blade assembly (D) and turn counterclockwise to
secure.
11.
9
Lowes.com/harborbreeze
D
F
11
Gap
Shaft
lock
Pin
DD
10
Set
Screw
Motor
D
DD
ASSEMBLY INSTRUCTIONS
Shaft