13
OPERATING INSTRUCTIONS
The light pull chain, located to the left of the reverse
switch, is used to turn the light ON or OFF.
The fan pull chain, located to the right of the
reverse switch, has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three
is LOW and four turns the fan OFF.
1.
2.
2
1
Reverse
Switch
Use the fan reverse switch on the fitter plate (C) to
optimize your fan for seasonal performance. A
ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
NOTE: Wait for fan to stop before moving the
reverse switch.
3.
C
3
Reverse
Switch
Reverse
Switch
To Next Page
Loading...
Need help?
General
