Harbor Freight Tools TITANIUM TIG200 - Product Symbology and Specifications

Page 7<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 56825
?@<6AQD@CEA6E@ER6 S@?CR%T6GUCEVT6GUCEV%ACW? SETUP ?@<6AQD@CEA6E@ER6 S@?CR%T6GUCEVT6GUCEV%ACW? SETUP
?>5+&7&3>
Wire Feed (Speed)
Workpiece Ground Cable
Torch Cable
Overheat Shutdown Indicator
Cooling Fan
!@R
Volts Alternating Current
@
Amperes
XR!
Open Circuit Voltage
[!@
Kilovolt Amperes
(Volts / 1000 * Amperes)
CWD
Inches Per Minute
@TV
American Wire Gauge
Electric Shock Hazard.
Do not touch energized parts.
Inhalation Hazard.
Keep head out of fumes
and use proper ventilation.
Read manual before
setup and/or use.
Fire Hazard.
Keep flammable materials
away during welding. Spatter
can cause accidental fires.
Arc Ray Hazard.
Wear welding helmet with
properly rated filter lens.
Pacemaker Hazard.
Welding processes may
interfere with pacemakers.
Consult doctor before use.
?/*4"2"4,$"&8#
TIG Stick
௘9$&௘+] ௘9$&௘+] ௘9$&௘+] ௘9$&௘+]
Power Input at Output ௘$DW௘$ ௘$DW௘$ $DW௘$ ௘$DW௘$
Welding Current Range ௘$௘±௘$ ௘$௘±௘௘$ ௘$௘±௘$ ௘$௘±௘$
Rated Duty Cycles
25% @௘$
100% @௘$
20% @௘$
100% @௘$
25% @௘$
100% @௘$
20% @௘$
100% @௘$
Maximum OCV 13.5௘VDC (with VRD) 13.5௘VDC (with VRD)
Weldable Materials
AC: Aluminum
DC: Mild Steel, Stainless Steel, Chrome Moly
Mild Steel, Stainless Steel,
Cast Materials