Hardi COMMANDER Plus 1200

38 HARDI
®
COMMANDER OPERATOR’S MANUAL
• Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination
from dirt and water condensation.
• Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before
lubricating.
• Avoid skin contact with oil products for longer periods.
• Note: If the sprayer is cleaned with a high pressure cleaner or fertilizer has been used, lubrication of all
sections is recommended.
Lubrication
Recommended lubricants
About lubricants
*)
Guidelines - greasing
• Pump grease into zerks until new grease becomes visible.
Maintenance
Ball bearings
Universal Lithium grease, NLGI No. 2
Slide bearings
Lithium grease with Molybdenumdisulphide
or graphite
Oil lubricating points
SAE 80W/90 Gear oil
CASTROL EPX 80/W90
SHELL SPIRAX 80W/90
MOBIL MOBILUBE 80W/90
A
B
C
Lubricatin
g
point
s
L
ub
ri
ca
n
t
*
)
*
)