54 HARDI
®
COMMANDER OPERATOR’S MANUAL
Equipment and Accessories
Tank Rinse System (optional)
The Rinse system can be added to the flush system.
This provides a means to rinse the main tank using
pressurized water to spray the inside of the tank
through specially designed spinning nozzles. See the
Flush & Rinse™ Operator’s Manual for complete
operational instructions.
HARDI
®
Monitor 1500 (optional)
The HARDI
®
Monitor 1500 monitors the application
rate. When used with the electric control unit switch
box, correct area covered and up to 8 spray boom
section control is possible.
Rinse Valve
Rinse Nozzles on Top of Tank
HARDI
®
Controller 2500 (optional)
The HARDI
®
Controller 2500 permits automatic control
of the application rate. This allows you to concentrate
on driving as the rate is automatically maintained by
the HC 2500. Press the “up” or “down” arrow keys to
change the application rate. Easy, quick and simple. Up
to 8 spray boom section control is possible.
Mustang 3500 Controller (optional)
The Mustang 3500 Controller offers fully integrated
boom controls (3 - 7 sections), integrated foam marker
controls, integrated TWIN FORCE controls, 3 possible
preprogrammed application rate settings, 9 different
field counters, DGPS compatible, prepared for commu-
nication with Precision Farming Terminals and pocket
PC’s (iPAQ - models: 3650, 3670), variable rate appli-
cation, rain & dust proof and 3 year warranty.
To Next Page
Loading...
Need help?
General
