4 - System setup
72
Equipment Setup
Configuration tab
The Configuration tab is where you can create,
view and change configuration settings.
An operating configuration is a task-specific
association of vehicle, implement, controller, and
speed source that is saved for use over different
seasons and on different displays.
Press to add an operating configuration.
A wizard takes you through the process
of creating a configuration.
• When finished, the new configuration
appears in the list on the left side of the
screen.
• When you highlight the configuration, the
equipment in the configuration are listed in
the box on the right side of the screen.
÷
NOTE! Information regarding configurations for specific operations is given in each operation’s feature user guide.
Press to rename the configuration.
Press to adjust configuration settings.
Press to remove a configuration.
±
WARNING! When you remove a configuration, all data logged with that configuration will also be removed!
Press to add, edit, or remove information for a specific vehicle, implement or controller.
Product tab
Configuration
Configuration Setup
Product
Equipment
Equipment
Name
To Next Page
Loading...
