7 - Fault finding
99
Mechanical problems
Emergency Operation - Hydraulics
In case of power failure, the damper control can be operated as follows:
1. Remove plastic cover (A) from valve (B).
2. Pivot valve (B) inward.
Emergency Operation - Liquid system
In case of power failure, it is possible to operate all functions of the operating unit manually. First disconnect the multi-plug
from the control box. Now manually turn the emergency control knobs.
The problem may be due to a blown fuse. A fuse is placed inside the box. Fuse type: Thermo.
To Next Page
Loading...
Need help?
General
