59HARDI
®
NAVIGATOR 550M, 800M, 1000M CENTRIFUGAL OPERATOR'S MANUAL
7.6 4" Boom Pressure Gauge (optional)
Fig.38
4" Boom Pressure Gauge
A large and easy to read 4" boom pressure gauge to replace the standard
2-1/2" gauge. This gauge is to be mounted near the tractor cab allowing
the operator to monitor the boom pressure for more accurate control of
the application rate.
7.7 Flush System (optional)
Fig.37
Flush Tank (90 gal. shown)
Flush system provides a means to be able to fl ush the pump, controls,
boom feed lines and complete boom and nozzles with clean water from
a 90 gal. tank.
Fig.36
To Next Page
Loading...
Need help?
General
