To Next PageTo Next PageWhat to do if my Harman Kardon AVR 151 Receiver front-panel display lights, but there’s no sound or picture?
If the front-panel display lights up but you're not getting any sound or picture from your Harman Kardon Receiver, ensure all input and speaker connections are securely connected. Also, check to see if the MUTE button is activated. Finally, make sure the volume isn't turned all the way down.
What to do if there is no sound from center or surround speakers on my Harman Kardon AVR 151?
If you're not getting sound from the center or surround speakers on your Harman Kardon Receiver, make sure you've selected a surround mode other than stereo. Also, consider that mono program material contains no surround information. Check the speaker configuration in the setup menu. The surround decoder may not create center or surround-channel information from nonencoded programs.
What to do if my Harman Kardon Receiver does not function?
If your Harman Kardon Receiver isn't functioning, first ensure that the power cord is properly plugged into a working AC power outlet. Also, verify that the AC outlet isn't controlled by a switch that might be turned off.
What to do if there is no sound from any speaker connected to my Harman Kardon AVR 151 Receiver?
Check all speaker wires at both the speaker and AVR connections, looking for any crossed wires. For further assistance, contact your local Harman Kardon service center.
What to do if unable to establish network connection on Harman Kardon AVR 151?
If you're unable to establish a network connection with your Harman Kardon Receiver, try cycling the AVR into the Off mode, and then turn it on again.
What to do if my Harman Kardon AVR 151 unit does not respond to remote control commands?
If your Harman Kardon Receiver isn't responding to the remote, first replace the batteries in the remote. If that doesn't work, make sure that the receiver's front panel remote sensor has a clear line of sight to the remote.
How to fix Harman Kardon Receiver when unable to establish network connection?
If your Harman Kardon Receiver is unable to establish a network connection, try cycling the AVR off and then turning it back on again. This will reboot the system.
Why is there intermittent buzzing in the tuner of my Harman Kardon AVR 151?
If you're experiencing intermittent buzzing in the tuner of your Harman Kardon Receiver, it might be due to local interference. Try moving the receiver or antenna away from computers, fluorescent lights, motors, or other electrical appliances.
How to activate remote control Programming mode on Harman Kardon AVR 151?
To activate the remote control Programming mode on your Harman Kardon Receiver, ensure you hold the Source Selector button for at least 3 seconds.
What to do if Harman Kardon AVR 151 Receiver does not respond to remote control commands?
If your Harman Kardon Receiver isn't responding to the remote control, first replace the batteries in the remote. If that doesn't work, make sure there's nothing blocking the path between the remote and the receiver's front sensor.
General| Impedance | 27 Ω |
|---|---|
| Receiver type | - |
| RMS rated power | 375 W |
| Audio output channels | 5.1 channels |
| Power output per channel (20-20KHz@8 Ohm) | 75 W |
| HDMI in | 4 |
| USB ports quantity | 1 |
| Ethernet LAN | Yes |
| AM band range | 522 - 1.620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Internet radio services supported | vTuner |
| Optical drive included | No |
| Analog signal format system | PAL |
| Display | LCD |
| HDMI version | 1.4a |
| Product color | Black |
| Audio decoders | Dolby Digital 5.1, Dolby Pro Logic II, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 410 W |
| Cables included | AC |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 440 mm |
| Height | 121 mm |
| Weight | 4600 g |
