How to troubleshoot a Harman Kardon AVR 1510 Receiver that does not function?
If your Harman Kardon Receiver isn't functioning, first ensure that the power cord is properly plugged into a working AC power outlet. Also, check to see if the AC outlet is controlled by a switch.
What to do if there is no sound from center or surround speakers on my Harman Kardon AVR 1510?
If you're not getting sound from the center or surround speakers on your Harman Kardon Receiver, make sure you've selected a surround mode other than stereo. Also, consider that mono program material contains no surround information. Check the speaker configuration in the setup menu. The surround decoder may not create center or surround-channel information from nonencoded programs.
What to do if my Harman Kardon Receiver does not function?
If your Harman Kardon Receiver isn't functioning, first ensure that the power cord is properly plugged into a working AC power outlet. Also, verify that the AC outlet isn't controlled by a switch that might be turned off.
What to do if there is no sound from any speaker connected to my Harman Kardon AVR 1510 Receiver?
Check all speaker wires at both the speaker and AVR connections, looking for any crossed wires. For further assistance, contact your local Harman Kardon service center.
What to do if unable to establish network connection on Harman Kardon AVR 1510?
If you're unable to establish a network connection with your Harman Kardon Receiver, try cycling the AVR into the Off mode, and then turn it on again.
What to do if my Harman Kardon AVR 1510 unit does not respond to remote control commands?
If your Harman Kardon Receiver isn't responding to the remote, first replace the batteries in the remote. If that doesn't work, make sure that the receiver's front panel remote sensor has a clear line of sight to the remote.
How to activate remote control Programming mode on a Harman Kardon AVR 1510 Receiver?
If you can't activate the remote control Programming mode on your Harman Kardon Receiver, make sure you hold the Source Selector button for at least 3 seconds.
Why is there no sound from center or surround speakers on my Harman Kardon AVR 1510 Receiver?
If you're not hearing sound from the center or surround speakers on your Harman Kardon Receiver, check that you've selected a surround mode other than stereo. Also, consider that monophonic programs don't have surround information, and the surround decoder may not create center or surround channel information from nonencoded stereo programs. Finally, verify the speaker configuration in the setup menu.
Why is there no sound from any speaker on my Harman Kardon AVR 1510 Receiver?
If you are not getting any sound from your Harman Kardon Receiver speakers, it might be in protection mode because of a possible short circuit. Check all the speaker wires at both the speaker and AVR connections to make sure there are no crossed wires. If this doesn't work, the unit might have internal problems and you should contact your local Harman Kardon service center.
What to do if Harman Kardon Receiver does not respond to remote control commands?
If your Harman Kardon Receiver isn't responding to the remote control, first replace the batteries in the remote. If that doesn't work, make sure there's nothing blocking the path between the remote and the receiver's front sensor.
Audio Specifications| stereo power | 75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD |
|---|---|
| multichannel power | 75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD |
| input sensitivity/impedance | 250mV/27k ohms |
| signal-to-noise ratio (IHF-A) | 75dB |
| frequency response (@ 1W) | 10Hz – 130kHz (+0dB/–3dB) |
| high instantaneous current capability (HCC) | ±25 amps |
| slew rate | 40V/sec |
FM Tuner Specifications| frequency range | 87.5MHz – 108.0MHz |
|---|---|
| usable sensitivity IHF | 1.3µV/13.2dBf |
| signal-to-noise ratio (mono/stereo) | 70dB/68dB |
| distortion (mono/stereo) | 0.2%/0.3% |
| stereo separation | 40dB @ 1kHz |
| selectivity (±400kHz) | 70dB |
AM Tuner Specifications| frequency range | 520kHz – 1, 510kHz |
|---|---|
| signal-to-noise ratio | 38dB |
| usable sensitivity (loop) | 375µV |
| distortion (1kHz, 50% mod) | 1.0% |
| selectivity (±10kHz) | 30dB |
Video Specifications| television format | NTSC |
|---|---|
| input level/impedance | 1Vp-p/75 ohms |
| output level/impedance | 1Vp-p/75 ohms |
| video frequency response (composite video) | 10Hz – 8MHz (–3dB) |
| HDMI | Supports up to 4K x 2K |
General Specifications| power requirement | 120V AC / 60Hz |
|---|---|
| power consumption | <0.5W (standby); 410W maximum |
| dimensions (H x W x D) | 4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm) |
| weight | 10 lb (4.6kg) |
Lists items included with the AVR.
Provides critical safety guidelines for operating the AVR.
Details on proper placement and ventilation for optimal performance.
Illustrates and labels all connectors on the front panel.
Explains the function of each front-panel button and feature.
Illustrates and labels all connectors on the back of the AVR.
Explains the function of each rear-panel connector.
Illustrates and labels all buttons on the system remote control.
Explains the function of each button on the remote control.
Describes the components of a typical home theater setup.
Explains multichannel audio benefits and surround sound technologies.
Guidelines for positioning the left, center, and right speakers.
Instructions for positioning surround speakers and subwoofer.
Guides for connecting speakers and the subwoofer.
Explains how to connect various audio/video source devices.
Details on using HDMI for digital audio and video.
Guides for connecting digital audio via coaxial and optical.
Instructions for analog audio and composite video connections.
Explains using the USB port for media playback and updates.
Step-by-step guide for connecting speakers and subwoofer.
Instructions for connecting the AVR to a TV.
How to connect various source devices and manage assignments.
Detailed setup for HDMI, optical, and coaxial connections.
Guide for connecting devices via analog audio and composite video.
How to connect analog audio devices and radio antennas.
Instructions for network connectivity and IR equipment.
Connecting and using USB and iOS devices.
Connecting trigger output and AC power supply.
Steps to insert batteries into the remote.
Guide to programming the remote for other devices.
Turning on the AVR and accessing the menu system.
Detailed guide to setting up speakers, including crossover and distance.
Setting up individual speaker configurations and crossover frequencies.
Setting speaker distances and calibrating output levels.
Connecting the AVR to a network and configuring IP settings.
Introduction to operating the AVR.
Information on using the mobile app for control.
How to control volume, mute sound, and use headphones.
How to choose input sources and adjust surround sound.
Tuning FM/AM radio and managing presets.
Playing audio files from a USB device.
Playing Apple devices and streaming network media.
How analog and digital audio signals are processed.
Explains various surround modes and incoming bitstreams.
Customizing surround modes for different categories.
Specific settings for Dolby Pro Logic II Music mode.
Configures panel timeout, auto power off, and menu timeout.
Adjusts volume defaults, HDMI audio, HDMI link, and software updates.
Manages sleep timer functionality and processor reset procedures.
Addresses common problems like no sound, no picture, and remote control issues.
Details on audio performance, tuner capabilities, and video formats.
Overall technical details of the AVR.
Default connections for various source devices.
Default settings for speaker configuration and delay.
Default settings for source inputs and Dolby PLII Music.
Lists remote control product codes and default system settings.
Comprehensive descriptions of various surround sound modes.
Further details on surround modes and their bitstream compatibility.
Additional descriptions of surround modes like DTS Neo:6 and Logic 7.
Identifies each button by number for reference.
Lists functions for each remote button across different sources.
Lists functions for each remote button across different sources.
Lists product codes for programming TV devices.
Lists product codes for AUX-HDTV and AUX-VCR devices.
Lists product codes for AUX-CD and DVD devices.
Lists product codes for SAT, Game, and Cable devices.
Lists product codes for Cable, Media Server, and PVR devices.
Lists product codes for AUX-TiVo devices.
To Next Page
