Need help?Do you have a question about the Harman Kardon AVR 155 and is the answer not in the manual?
General| Impedance | 8 Ω |
|---|---|
| Receiver type | Surround |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Power output per channel (20-20KHz@8 Ohm) | 40 W |
| S-Video inputs quantity | 1 |
| Component video (YPbPr/YCbCr) in | 3 |
| Headphone connectivity | - |
| AirPlay | No |
| Equalizer | Yes |
| Product color | Black, Silver |
| Audio decoders | Dolby Digital, Dolby Pro Logic II, Dolby TrueHD, DTS |
| Apple docking compatibility | Not supported |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 11100 g |
Covers essential warnings for safe operation, installation, and handling of the unit.
Provides guidelines for proper placement to ensure safety and optimal performance.
Steps for the first turn-on and utilizing the on-screen display system.
Configuring input sources and selecting preferred surround sound modes.
Detailed guide to the automated system calibration process using EzSet/EQ.
Instructions for manually configuring speaker settings, delay, and levels.
Setting speaker delay times and adjusting A/V sync for lip-sync correction.
Guide for calibrating speaker output levels for optimal sound.
Configuring front panel display fade behavior for reduced distraction.
Addresses common operational issues with their causes and solutions.
Steps to reset the system's memory to resolve persistent issues.
To Next Page
