To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR1700 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| USB Input | Yes |
| Dolby Digital | Yes |
| DTS | Yes |
| Input Sensitivity/Impedance | 200mV/47k Ohms |
| Signal-to-Noise Ratio (IHF-A) | 100 dB |
| FM Tuner Frequency Range | 87.5 MHz – 108.0 MHz |
| FM Tuner Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB |
| FM Tuner Distortion (Mono/Stereo) | 0.2%/0.3% |
| FM Tuner Stereo Separation | 40 dB @ 1 kHz |
| AM Tuner Distortion | 1.0% |
| HDMI | Yes |
| HDMI Audio Return Channel | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Power Output per Channel | 100W |
| Weight | 5.1kg |
| FM Tuner Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf |
| AM Tuner Frequency Range | 530-1710kHz |
| AM Tuner Usable Sensitivity (Loop) | 500 μV/m |
| Power Requirement | 120V, 60Hz |
| Stereo Mode Power | 100 watts per channel |
Guidance on handling sensitive semiconductor devices to prevent static damage.
Safety checks for servicing and procedure to measure leakage current, not exceeding 0.5mA.
Detailed technical specifications for audio, video, tuner sections, and general features.
Diagram and description of front panel buttons, indicators, and connectors.
Diagram and description of all rear panel input/output ports and connectors.
Explanation of remote control buttons and how to operate the AVR and source devices.
Common issues, causes, solutions, and procedures for resetting the remote and AVR processor.
Procedure for adjusting amplifier bias current and DC voltage using a DC voltmeter.
