Harman Kardon AVR247 User Manual

Surround
Mode
Tuning
Preset Stations
Surround
Select
Tuner Band
Tuning
Mode
Source
Select
Headphone
Jack/EzSet/EQ
Microphone
Input
Digital
Audio Inputs
(Optical 3 and
Coaxial 3)
Video 4
Video Inputs
Video 4 Analog
Audio Inputs
Navigation
Tone Mode
Speaker Size
Setup
Delay
Digital Input
Select
Power
Indicator
Main Power
Switch
Standby/On
Switch
Volume
Source
Indicators
Message Display
Surround Mode Indicators
Speaker/Channel
Input Indicators
Channel Level
Adjust
NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at
www.harmankardon.com.
7
AVR247 harman/kardon

Harman Kardon AVR247 Specifications

General

Number of Channels	7.1
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Input Sensitivity	200 mV
Signal to Noise Ratio	100 dB
Total Harmonic Distortion	0.07%
Component Video Inputs	3
Component Video Outputs	1
Power Output	50 Watts per channel
Surround Sound Formats	Dolby Digital, DTS, Dolby Pro Logic II
Video Inputs	Composite, S-Video
Video Outputs	Composite, S-Video
Dimensions	440 x 165 x 382 mm
Frequency Response	10 Hz - 100 kHz
Audio Inputs	Analog, Optical, Coaxial