19
Security
In the Security Column, modification can be made for the Login Password.
Web User Management: The Login Password default is admin.
1. Click the “Change Password” button and the following window pops up for new password verification.
2. Click the “Save” button to save the changes.
Note: Passwords must be 4 to 16 characters in length (alphanumeric only).
SSH/Telnet Account: SSH/Telnet Account is used to configure the user name and password of the account. For SSH
Account, the default user name is admin, the default password is password. For Telnet Account, the default user
name and password are null.
Note: Reboot the device for the SSH changes to take effect.
Certification Management: In the Certification Management column,
Private Key: Click on the “Browse” button and locate the Private Key file on your local PC then click “Open”
to install the key in the unit.
Certificate: Click on the “Browse” button and locate the Certificate file on your local PC then click “Open” to
install the certificate in the unit.
To Next Page
Loading...
