20
Password: Set the password used to encrypt the content stream. After entering the password press the
"Accept" button to store the settings
Switcher
In the Switcher Column, 3 submenus are used to perform the settings of routing.
Configuration:
Output:
- Mirrored: This column provides control and settings of mirrored window in the Windowing mode.
1. General: Set Scaling as “Auto” or “Manual”, and the resolutions of output sources from the drop-down menu.
2. On-Screen Display: Enable and disenable OSD information and further define its color and position.
3. Display Settings: Click to Mute or Freeze the output video sources. Set Blank Color/Logo from the drop-down menu.
Not
e: The format RGB is 8bits (256 colors) bitmap and the size is up to 960x540.
- HDCP Settings: HDCP support of HDMI Input 1-4 ports can be set.
- CEC Settings: Click Manual Power On/Off to execute a display manual control on/off. Click Auto Power
On/Off to define a display control automatically.
To Next Page
Loading...
