Harman AMX PR-WP-412 - Page 34

34
Is this correct? Type Y or N and Enter ->y
Settings written. Device must be rebooted to enable
new settings.
>Current device friendly name:PR-WP-412
>--Current IP mode: static
>--Current IP Address: 192.168.1.20
>--Current Subnet Mask: 255.255.255.0
>--Current Gateway IP: 0.0.0.0
5. get dns Get device's DNS
address
Command sent:
>get dns
Response:
DNS Servers
------------------------------------------
Domain suffix: www.amx.com
Entry 1: 8.8.8.8
Entry 2: 8.8.4.4
Entry 3: 9.9.9.9
6. set dns Set device's DNS
address
Command sent:
>set dns
Response:
Enter Domain Suffix: www.amx.com
Enter DNS Entry 1 : 8.8.8.8
Enter DNS Entry 2 : 8.8.4.4
Enter DNS Entry 3 : 9.9.9.9
You have entered:
Domain Name: www.amx.com
DNS Entry 1: 8.8.8.8
DNS Entry 2: 8.8.4.4
DNS Entry 3: 9.9.9.9
Is this correct? Type Y or N and Enter ->Y
Settings written. Device must be rebooted to enable
new settings.
>--Current Domain Name: www.amx.com
>--Current DNS Entry 1: 8.8.8.8
>--Current DNS Entry 2: 8.8.4.4
>--Current DNS Entry 3: 9.9.9.9
7. get ethernet mode Get ethernet mode
Command sent:
>get ethernet mode
Response:
--Current ethernet mode : auto
8. set ethernet mode Set ethernet mode
Command sent: