Harman AMX PR-WP-412 - Page 50

50
to LOGO, the LOGO
is fixed in the center
green,
blue,
logo1,
logo2,
logo3
}
>set video mute off for output 1 and output 2
29. get vidout testpat Get vidout test
pattern setting
Command sent:
>get vidout testpat
Response:
get video test pattern set to off for output 1 and output
2
30. set vidout
testpat:<pattern>
Set vidout test
pattern setting
<pattern>=
{
off (no test pattern)
red
green
blue
}
Command sent:
>set vidout testpat:red
Response:
set video blank to black for output 1 and output 2
>set video test pattern to red for output 1 and output 2
31. get vidout
sleep:<output
channel>
Get vidout tmds
sleep on/off setting
for specified output
Command sent:
>get vidout sleep:1
Response:
get video sleep on for output 1
32. set vidout
sleep:<output
channel>,<state>
Set vidout tmds
sleep on/off setting
for specified output
<output channel>=
1~8
<state>= on/off
Command sent:
>set vidout sleep:1,off
Response:
set video sleep off for output 1
>set vidout freeze off for specified output 1 and output
2
>set aspect ratio to user for input 1
>set aspect ratio to best fit for input 2
>set aspect ratio to best fit for input 3
>set aspect ratio to best fit for input 4
33. get vidout sleep
delay:<output
channel>
Get vidout tmds
sleep on/off delay
time setting for
specified output
Command sent:
>get vidout sleep delay:1
Response:
get video sleep off delay time set to 300 seconds for
output 1
34. set vidout sleep
delay:<output
channel>,<time>
Set vidout tmds
sleep on/off delay
time setting for
specified output
<output channel>=
1~8
<time>= 0~1800
seconds
Command sent:
>set vidout sleep delay:1,100
Response:
set video sleep off delay time to 100 seconds for output