Harman AMX PR-WP-412 - Page 49

49
t channel> on specified output
port
▪ make active for sink on output 1
▪ No attached sink
19. get vidout cec disp
auto:<output
channel>
Get cec display auto
on/off state for
specified output
<output channel>=
1~2
Command sent:
>get vidout cec disp auto:2
Response:
get cec display auto off for output 2
20. set vidout cec disp
auto:<output
channel>,<state>
Set cec display auto
on/off state for
specified output
<output channel>=
1~2
<state>= on/off
Command sent:
>set vidout cec disp auto:2,on
Response:
set cec display auto on for output 2
21. get vidout cec sleep
timeout:<output
channel>
Get cec display auto
on/off delay time for
specified output
<output channel>=
1~2
Command sent:
>get vidout cec sleep timeout:2
Response:
get cec sleep timeout set to 30mins for output 2
22. set vidout cec sleep
timeout:<output
channel>,<time>
Set cec display auto
on/off delay time for
specified output
<output channel>=
1~2
<time>= 1~30
minutes
Command sent:
>set vidout cec sleep timeout:2,5
Response:
set cec sleep timeout set to 5mins for output 2
23. get vidout mute Get video mute
state for specified
output
Command sent:
>get vidout mute
Response:
get video mute off for output 1 and output 2
24. set vidout
mute:<state>
Set video mute for
specified output
<state>= on/off
Command sent:
>set vidout mute:on
set video mute on for output 1 and output 2
25. get vidout freeze Get video freeze
state for output
Command sent:
>get vidout freeze
Response:
get video freeze off for output 1 and output 2
26. set vidout
freeze:<state>
Set vidout freeze for
specified output
<state>= on/off
Command sent:
>set vidout freeze:on
Response:
set vidout freeze on for specified output 1 and output 2
27. get vidout blank Get video blank
setting for specified
output
Command sent:
>get vidout blank
Response:
get video blank set to black for output 1 and output 2
28. set vidout blank:
<pattern>
Set vidout blank
setting for specified
output
NOTE: When select
<pattern>=
{
black (no blank
color),
red,
Command sent:
>set vidout blank:blue
Response:
set video test pattern to off for output 1 and output 2
>set video blank to red for output 1 and output 2